Loading; Loading For Best Cleaning And Drying Performance - Kenmore ULTRA WASH 665.1715 Guide D'utilisation Et D'entretien

Rinse Aid Setting
Your rinse aid dispenser is adjustable. For most water conditions,
the factory setting will give good results. If you have hard water
and notice calcium buildup on your dishware, you may want to
try a higher setting. If you notice foam in your dishwasher, use a
lower setting.
1. Angle dirtiest dish surfaces downward and allow
space for water to flow up through each rack and
between dishware.
Separating allows water flow.

LOADING

Loading for Best Cleaning and Drying Performance

To Adjust the Setting
1. Turn the knob to the REFILL position and remove.
2. Turn the arrow inside the dispenser to the desired setting.
3. Replace the knob and turn to the LOCK position.
2. For best silverware cleaning use the slots in the covers
to keep items separated.
3. Angle concave surfaces such as the bottom of coffee
cups to allow water to drain and improve drying
performance.
Angled surfaces
Separated
13