Other Functions; Using The Rotary Commander - Sony CDX-S2000C Mode D'emploi

Other Functions

You can also control the unit with a rotary
commander (optional).

Using the rotary commander

First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S E L
M O D E
D S P L
By pressing buttons
(SEL)
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press
(SOURCE)
(MODE)
(ATT)
(OFF)*
(SEL)
(DSPL)
* If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
16
D S P L
M O D E
S E L
(ATT)
(MODE)
(DSPL)
(OFF)
To
Change source
(Radio/CD)/Power on
Change radio band
Attenuate sound
Stop playback or radio
reception/Power off
Adjust and select
Change the display item
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SEL) for 2 seconds while
pushing the VOL control.
SEEK/AMS
control
PRESET
control