DURAVIT DuraStyle Notice De Montage page 6

1
110 V
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
> Plug mirror into the outlet
and line up the mounting
hooks with the inserts on
back of the mirror.
> Push mirror onto wall
until hooks are inserted
securly.
2
Ø ⅜"
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Lay the bottom of the
mirror against the wall
and tighten the set screw
to secure the mirror in
place.
LED
1-2 sec 100%
3
2x
3x
> The plastic anchors
provided are for concrete
wall applications.
7
> Check the mirror is
leveled and securely
attached to the wall.
4
1x
2x
> Thread the two mounting
screws into the top two
anchors, leaving the hooks
facing up.
> Secure the L-bracket to
the wall with the set screw
on the bottom.
8
> Use the adjustment tool to
move the mirror up and
down for leveling.
LED
>3 sec 100% 10%
MAL_DuraStyle_DS7269/17.10.1
6