ADEO SCREEN Cinema Curved PFIXCINEMACUR Série Manuel D'installation page 28

FRAME ASSEMBLY SCREEN
Prepare the ladder or the scaffolding on the front of the screen, put the rolled fabric on the upper
profile of the screen and fixed to the profile with 3 elastics: 1 in the centre and 2 near the corners,
after that unroll the fabric.
POSITION THE FABRIC IN THE CENTRE OF THE HORIZONTAL PROFILE
In order to facilitate the installation of the fabric in the center of the fabric and in the center of the
horizontal profile you can find a red stamp. (ths when you have odd profiles, if are even the center is
the connection of the profiles)
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: CINEMA CURVED Installation Manual rev2 |08.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
Page 28