Receive Mode; Using Optional Equipment; Cd/Md Changer - Sony CDX-F7715X Mode D'emploi

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setup
Clock Adjust (Clock Adjust) (page 4)
Beep
To set "on" ( ) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "Normal" ( ): to use the rotary commander in
z
the factory-set position.
– "Reverse": when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1 (AUX Audio)
To turn the AUX source display "on" (
"off" (page 13).
Display
Clock (Clock Information)
To display the clock and the display items/image
at the same time.
– "on": to display at the same time.
– "off" ( ): to not display at the same time.
z
A.Image (Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
– "off" ( ): to not change the image
z
automatically.
– "ALL": to step repeatedly through the display
images in all display modes.
– "SA": to step repeatedly through the display
images of Spectrum analyzer.
– "Movie": to step repeatedly through the
display images of Movie mode.
INFO (Display Information)
To display the items (depending on the source,
etc.) at the bottom of the display while a image
is displayed.
– "on" ( ): to display the items.
z
– "off": to not display any items.
Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Demo* 1 (Demonstration)
To set "on" ( ) or "off" (page 4).
z
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "on": to scroll.
– "off" ( ): to not scroll.
z

Receive Mode

Local (Local seek mode)
– "on": to only tune into stations with stronger
signals.
– "off" (
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "on": to hear stereo broadcasts in monaural.
– "off" (
IF
– "Auto" (
reception frequency to eliminate noise.
– "Wide"*
broadcasts in stereo and with full the
frequency signal reception.
Sound
) or
z
EQ7 Tune (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off," (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off,"
( ) "125Hz" or "78Hz."
z
Loudness
To enhance bass and treble at lower volume.
– "on": to reinforce bass and treble.
– "off" (
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
Edit
Name Edit (page 10)
Name Delete (page 10)
BTM (page 8)
*1 When the unit is turned off.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
): to tune normal reception.
z
): to hear stereo broadcast in stereo.
z
): to narrow automatically the
z
2 : to always hear FM stereo
) "78Hz" or "125Hz."
z
): to not reinforce bass and treble.
z
continue to next page t
11