Bartscher 120.109 Mode D'emploi page 23

ATTENTION!
Pay attention to the colour of shoe polish! Use a colourless polish to avoid
mistakes.
•
Replace the screw and ball and replace the cap on the container.
•
Replace the container in the shoe polish dispenser.
•
Replace the dispenser into the device by squeezing it at the sides then inserting into
the support until it clicks into place.
Operating the device / polishing shoes
•
Connect the device to a single grounded outlet.
•
Turn on the device by pressing the ON/OFF button.
•
First, remove dirt and dust from the shoes by using the central cleaning brush
Dirt will be removed to the mat under the brush.
NOTE!
Regularly clean or vacuum the dirt-catching mat!
•
Place polish on the shoes by gently pressing the ball below the shoe polish
dispenser.
•
Leave the polish for a moment to dry, then shine the shoes using the polishing brushes-
on the right side
- 22 -
for dark shoes, and on the left
Dia. 2
for light shoes (Dia. 2).
.