Wireless Connection - Danby Parcel Guard DPG37U Manuel D'installation

OPERATING INSTRUCTIONS
RECEIVING MAIL
Mail can be delivered into the top door, which will
then drop down into the secure lower compartment.
Place the Parcel Guard at or near the doorstep that
deliveries are usually sent to.
When placing an order online, indicate in the
special notes fi eld that the delivery should be placed
into your Parcel Guard.
Deliveries can be placed into the top door or into
the bottom door using the app or the manual
override to unlock the bottom door.
RETRIEVING MAIL
To retrieve mail that has been delivered, use either
the app or the manual override to unlock the bottom
door and remove the delivery.
OUTGOING MAIL
Use the provided outgoing mail strap to attach any
outgoing mail to the inside of the top door.
Place the signal fl ag in the upright position to tell
the mail carrier that there is outgoing mail in the top
compartment.
RETURNING PURCHASES
Use the app to create a unique barcode that can be
sent by text or email to the mail carrier.
Place the package to be returned in the bottom
compartment.
The mail carrier will use the barcode to open the
lower compartment and retrieve the outgoing
package.

WIRELESS CONNECTION

This appliance can be controlled with a wireless
application on your wireless device.
Visit https://www.danby.com/support/#apps
to download the application and learn about its
operation.
BALLAST WEIGHT
A weight can be added to the bottom of the
parcel guard to provide stability and security if the
supplied mounting fastener are not used.
A sandbag can be used for ballast weight. It should
be fi lled with a maximum of 10 kgs (22 lbs) of fi ne
sand. Alternatively a brick or similar item can also
be used.
Remove the interior fl oor of the Parcel Guard and
place the ballast weight inside the empty space in
the fl ooring. Ensure that no wires get unplugged
during this process.
Replace the interior fl oor.
5