Accessories; Maintenance And Repair; Questions And Answers - König Electronic HC-BLDPRESS250 Mode D'emploi

Power Supply
Power Consumption
Operating System
Operating Conditions
Storage
Conditions

Accessories

5. Notes

5.1 Maintenance and Repair

This instrument includes sensitive components. Please make sure it is always protected from moisture,
impact, dropping, dust and direct sunlight, and handle it with care to ensure prolonged usage. It is
recommended to clean the surface of the instrument and the arm cuff with a soft and dry cloth.

5.2 Questions and Answers

Q1: The computer did not run the measurement programme automatically after the unit had been
connected.
A1: Please click on the icon on the Toolbar at the bottom right corner of the screen to execute the
program manually.
Q2: What is the standard specification of the attached USB Transfer Cable?
A2: An additional USB 2.0 extension cable is compatible with the monitor.
The total length of the cable must not exceed 120 cm.
Q3: The cuff keeps pumping up and is not stopping.
A3: Press "Stop" to stop the measurement process.
Close the software and restart it.
Close all other programmes and re-execute the measurement process.
Q4: The software cannot be displayed normally on screen.
A4: Check if you have installed the software correctly, and if your computer system supports the
software.
DC 5V from USB port of your computer
2W
Microsoft Windows 7, Vista, XP or 2000.
Temperature: 10 ~ 40°C
Humidity: 30%~85% RH (without condensation)
Temperature: -20 ~ 50°C
Humidity: 10%~95% RH (without condensation)
USB Transfer Cable / Storage Bag / Arm Cuff /
User Instruction Manual / USB BPM Software CD
5