Installation; Electrical Installation; Environment Concerns - Electrolux EWL1AX Manuel D'utilisation

8
www.electrolux.com

7. INSTALLATION

Weight of the lamp: 3 kg
Maximum pull strenght: 20 kg
7.1
Make sure that the worktop below the
lamp is made of an incombustible
material not printed or painted.
Real wood and artificial worktop material
can show colour changes if in direct
contact with the light of the lamp.

7.2 Electrical installation

7.3 Cable
Cable types applicable for installation or
replacement: H07 RN-F, H05 RN-F,
H05RRF, H05 VV-F, H05 V2V2-F (T90),
H05BB-F.

8. ENVIRONMENT CONCERNS

Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
WARNING!
The person who is mounting the
lamp should make sure that the
fixing elements are right and
suitable for the walls and ceiling
he finds. The manufacturer
declines any responsibility for
damages caused by incorrect
mounting.
WARNING!
Refer to the Safety chapters.
WARNING!
Only a qualified person must do
the electrical installation.
The manufacturer is not
responsible if you do not follow
the safety precautions from the
chapter "Safety Information".
For the section of the cable refer to the
total power (on the rating plate) and to
the table:
Total power
maximum 250W
The earth cord (green / yellow cable)
must be 2 cm longer than phase and
neutral cables (blue and brown cables).
7.4 Tension regulation
Please rotate the spring of the tension
regulation (7) to calibrate the weight of
the lamp and reach a steady position.
7.5 Safety distance
Keep a minimum distance of 40 cm from
the center of the warming lamp to any
flamable, backprinted or backpainted
surfaces.
and electronic appliances. Do not
dispose appliances marked with the
symbol with the household waste.
Return the product to your local recycling
facility or contact your municipal office.
Section of the
cable
3 x 1 mm²
min. 40 cm