Publicité
Les langues disponibles
Les langues disponibles
The roofing felt provided serves primarily as a temporary protection against the weather. We recommend
that you also apply a further layer of roof paper with bitumen cold bonding agent. (Not included in the
delivery!)
The possibility of differing wood moisture + tolerances in individual components may lead to variations in
dimensions, particularly in the area of the pediment/side wall height,
which must be adjusted during installation using appropriate means (e.g. electric plane).
The window/door panes must be sealed all round with transparent silicone for windows immediately after
assembly
and painting to ensure full resistance to driving rain.
Otherwise extreme rainfall may lead to interior leaks which cause discoloration and damage to the wood.
The manufacturer will accept no liability for such damage, there will be no replacement within the scope of
the guarantee nor is it covered by the manufacturer's warranty. We therefore refer you again to our
guarantee conditions at this point.
Tools
You should have the following tools to hand before beginning assembly:
Tape measure
Drill
Electric screwdriver Hammer Pencil
Burring iron
Rubber mallet
Saw
Universal cutter
Cord
Spirit level
Spanner
Abbreviations
RW = Rear wall
WS = Wall thickness
mm = Millimetre
cm = Centimetre
= Not included in delivery!
We hope you have a successful installation and wish you many happy hours enjoying your
weka product.
Copyright weka-Holzbau GmbH, Neubrandenburg
10
Techn. Änderungen vorbehalten!
Publicité
