Other Settings; Using A Microsd Card; Preparation - JVC GZ-HD310 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Other Settings

Using a microSD Card

The camcorder is programmed to record on
the built-in hard disk when it is shipped from
the factory. You can change the recording
medium to microSD card.
Operations are confirmed on the following
microSD cards.
- Panasonic
- TOSHIBA
- SanDisk
- ATP
Video recording:
Class 4 or higher compatible microSDHC
card (4 GB to 8 GB)
It is recommended to use Class 6 when
recording video in UXP mode.
Still image recording:
microSD card (256 MB to 2 GB) or
microSDHC card (4 GB to 8 GB)
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
Video data may not be recorded onto the
microSD cards on which video data have
already been recorded using the devices
from other manufacturers.
Insert a microSD card

Preparation:

Close the LCD monitor to turn off the
camcorder.
1
Open the microSD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the microSD card cover.
To remove a microSD card
Push the microSD card once.
After the card comes out a little, pull it out.
NOTE
Insert and remove the microSD card only
while the power is turned off. Otherwise, data
on the card may be corrupted.
Do not touch the terminal on the reverse side
of the label.
Change the recording medium
Set [REC MEDIA FOR VIDEO] and [REC
MEDIA FOR IMAGE] to [SD].
Format a microSD card when using it for
the first time
Select [FORMAT SD CARD] to format the
card.
1
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières