Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN Mounting instructions
Product description
EN
Figure :
Square service unit for dry-care floor coverings
on screed and for system floors, with floor cover-
ing cut-out for floor coverings of max . 15 mm
thickness . With cord outlet
in removable
1
hinged lid
for cable routing . With eight pre-
2
marked entry openings
for installation pipes
4
M20 or M25 . The frame
can be adjusted to
3
the top edge of the floor covering using four
height-adjustment supports
. The minimum
5
installation depth is 95 mm, the height adjust-
ment range +20 mm .
With strain relief, mounting support 1 x FLF and
mounting support 1 x 3x (type 13)
. With steel
6
plate as walk-on protection during mounting
7
and mounting cover
.
8
Accessory: Strain relief (item no . 7408 650)
23
Publicité
Table des Matières
