OHAUS Scout RS232 Mode D'emploi page 6

EN-4
CONNECTION
The RS232 Interface Kit cable terminates with a 9 pin Sub-D female connector.
Active pins: Pin 2 = TXD, Pin 3 = RXD, Pin 5 = Ground.
The Interface connector can connect directly to a computer, an OHAUS printer and
other printers.
RS232 OUTPUT
With the interface installed the balance will operate in several ways according to
the settings.
Output String:
[weight]
[space]
[unit]
[space]
[stability indicator]
[space]
[G,N,T,PT]
[CR]
[LF]
Note: The termination characters field contains CRLF, four CRLF, depending on
the FEED menu setting
Output examples: (Note: * and _ indicate spaces)
*****192.21_****g_*_**
*******0.01_****g_?_**
*******95.0_****g_*_*N
******169.6_****g_*_*G
*******95.0_****g_*_*N
*******74.6_****g_*_*T
11 characters (right justified)
1 character
5 characters (right justified)
1 character
1 character; "?" when unstable, blank when stable
1 character
2 character (right justified)
1 character
1 character
A.Print: off; Stable: off
Sable reading
unstable reading
A.Print: off; Stable: on
Content / Result -> on
Content / Gross -> on
Content / Net -> on
Content / Tare -> on
RS232 Interface