Prerequisites For Correct Measuring Results; Automatic User Recognition; Error Messages - Medisana BS 444 connect Mode D'emploi

A) Simple weight measurements with the „Step-On" function
Simply stand on the scales bare-
1
foot (without socks or similar).
B) Setting the personal data in the scales
The scales can store the data (gender, athlete mode, height, age) for 8 people with up to 30 memory locations each.
The values preset in the scales are: Male, 165 cm, 30 years old, kg.
Press your foot on the middle of the surface of the scales.
2 2
Press the SET button until the
1
memory slot flashes in the
display.
Select the desired memory slot
2
using the ▲/▼-buttons.

Prerequisites for correct measuring results

Reliable measurements can only be achieved under certain prerequisites:
• Always weigh yourself under the same conditions.
• Always weigh yourself at the same time of day.
• Stand up straight and stand still.
• Weigh yourself preferably in the morning, after showering or bathing, and with dry feet.
It is possible to obtain a reliable indication of body weight development from the results if
measurements are carried out consistently.

Automatic user recognition

Automatic user recognition based on last measurement:
Stand on the scales barefoot. Your user data (memory location) is selected automatically.
• If your user data is not selected correctly , select the number
(P1 to P8) by pressing "▲" or "▼" and confirm with "SET".

Error messages

P1P2 or other combinations of memory locations = The scale recognizes users already saved
based on their weight. In this case, two users have a similar weight. To select the correct user press
the UP key for the left value (example "P1") and the DOWN key for the right value (example "P2").
6
BS 444 CONNECT
Your weight is shown.
2
3
Press the SET button to save the
3
selection. Continue accordingly
to make the settings for gender,
athletic condition, height and
age.
Target Scale Not Connected
Instruction Manual GB
After you have set your personal
4
data, the display shows "0.0".
To finish the scale settings,
5
simply stand barefoot on the
scales.
The display shows the following
6
measurements:
• Weight
• Proportion body fat
• Proportion body water
• Proportion muscle mass
• Bone mass
• BMR (calory requirement)
• BMI