Risk Of Electric Shock - TDK-Lambda DRB120 Série Manuel D'instructions

PA620-04-xxx
PA634-04-01E

RISK OF ELECTRIC SHOCK

High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service personnel from
inadvertent contact with these dangerous voltages in the end equipment.
WARNING: When installed in a Class 1 end equipment, this product must be reliably earthed and professionally installed.
The (+) or (-) output(s) can be earthed or left floating.
The unit cover(s)/chassis (where applicable) must not be made user accessible.
Internal fuses protect the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to
TDK-Lambda UK LTD or one of their authorised agents.
A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock
and fire hazard protection.
Energy Hazards:
The main output of this product is capable of providing hazardous energy (240VA). Final equipment manufacturers must
provide protection to service personnel against inadvertent contact with the output terminals.
The ventilation openings on these products must not be impeded.
The unit cover/chassis, where applicable, is designed to protect skilled personnel from hazards. They must not be used as part
of the external covers of any equipment where they may be accessible to operators, since under full load conditions, part or
parts of the unit chassis may reach temperatures in excess of those considered safe for operator access.
TDK-Lambda
DRB120 Series
INSTRUCTION MANUAL