Control Installation - aldes VMC double flux Dee Fly Compact Hygro Notice De Montage

CONTROL INSTALLATION

Control panel
Preferably installed in the kitchen.
Flow rate selection
Selection of the ventilation flow rate by pressing
the left key:
• Speed 1: standard flow rate
• Speed 2: kitchen intensive flow rate, with a 30 minute
timer. Allows a better extraction of the smells and
humidity related to cooking activities
• Speed 3: high speed manual command used to increase
comfort in the dwelling
High-efficiency Dee Fly
control with by-pass
Installation
• Control is compatible with standard electrical mountings
• Connect the wires (flexible wires 0.25 or 0.5 mm²) to the
electronics of the control (see Electrical connections)
• Fit the electronics section of the control and fix in place
with screws.
• Clip on the façade of the control keypad
Bypass control (optional)
The bypass stops pre-heating of the fresh air when it goes
through the heat exchanger. The right hand button is used
to manually activate the bypass if necessary. When the
by-pass is open a blue indicator lights.
Selection of the automatic/manual mode
Filter blocked warning and system fault indicators
The red warning light on the controls shows possible
malfunctions of the Dee Fly system and tells the user that
the filter is clogged
• Light lit constantly: Filter clogged (change filters)
• Flashing light: Motor fault or temperature sensor
(See Maintenance and Troubleshooting)
Airflow
selection
key
By-Pass manual
override
control key
35