Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
No smell load charge
Figure nº 7 shows how to install the no smell charge.
Water tank.
Water from hands drops directly to a removable water tank. When water from the removable
water tank reaches the 'full level' an acoustic alarm sounds and the blue pilot light bright (see
Fig. 5). In this case, water in the tank must be emptied.
Two options to remove the water from the water tank are available:
I.
Press the two lateral clips and pull down the water tank, as the picture 8 shows.
Remove the water tank from its fitting place, empty and clean the tank and
re-place it.
II.
Press the push button as indicated in Fig. 9 until remove all the water contained into the
water tank.
Cleaning
For cleaning purposes only a wet cloth is to be used. Do not use
any kind of
detergent, acids, lye, abrasives, hydrochloric acid, etc.
Ensure that viewers IR LED's (interior windows machine) are
clean and transparent.
Atention: Take care not to damage or force any component.
Figure 7
Figure 8
Figure 9
-17-
www.all-care.eu
Figure 10
Publicité
Table des Matières
