Assembly - Greencut MNG300 Manuel D'utilisation

20
TECHNICAL DATA
Model
Length of the hose
Work pressure
Permissible temperature
Weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.

ASSEMBLY

1. Drill 3 M8 holes to match the holes located in the mounting bracket.
2. Connect the hose reel to the bracket with the tube.
Screw
Bracket
NOTE: It is recommended to install the mounting bracket at least 80cm from the floor.
MNG300
30m
8bar
-5º a 45º
12,8Kg
Washer
HOSE
Bracket
Expanded
nut
80cm
Tube