Topcom POWERLAN 6420 MINI Guide D'installation Rapide page 9

2. Push down for two seconds on the key on one of the Powerline plugs
that is already in operation.
The on/off light will flash slowly (0.5 seconds on/0.5 seconds off).
3. Within two minutes, push down the key on the extra Powerline plug
for two seconds.
The connection sequence starts.
Once the connection is complete, restart the plugs and the Powerline
LEDs on both plugs will light up.
Before adding the new Powerline, it is recommended that
the network passport for this plug be changed by pushing
down the "reset/simple connect" button for 12 seconds.
A Powerline that has already been used in another
network will still have the password for that network,
which means that the "reset/simple connect" button
mechanism will not operate.
7 PC help programme (Utility)
The Powerline plugs can also be configured using the PC software provided.
For this, please read the English manual on the CD-ROM.
PowerLan 6420 mini
9