Installation And Use; Safety Instructions; Use - Casselin CVR58L Mode D'emploi

Masquer les pouces Voir aussi pour CVR58L:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

5. INSTALLATION AND USE

5.1 Safety instructions

ELECTRICAL HAZARD
Danger from electric current!
• No contact with heat sources should take place with the power cord.
• Cord should not hang over edge of table or counter.
• Do not pour water into an appliance that is in operation or is still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.

5.2 Use

WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
- The device must be completely removed from its packaging. All protections must be completely removed.
- Place the appliance upright on a solid, flat surface. Never place the refrigerated display case on a
flammable surface. Position this machine in such a way as to ensure optimal air circulation. We advise you
to keep a minimum distance of 10 cm from the wall and other objects.
- Do not install this device near open fires or other heating devices.
- Do not install the device in a wet or humid place.
- The electric cable must be protected to at least 16 amps. The device must be plugged directly into a wall
outlet. Using a multiple socket will cause the device to trip.
- To avoid damaging the compressor, do not tilt the device more than 45 ° when transporting or installing it.
- Leave the device to stand for 2 hours before its first use.
- Before use, the device must be cleaned
- Connect the appliance and set your thermostat. Do not put food or drinks on until the
refrigerated display case cooled.
- Any hot food must be cooled before insertion into the appliance.
- The height of the shelves must be adapted to the height of the dishes. The dishes must be correctly
spaced to maximize the effect of refrigeration.
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cvr78lCvr98l

Table des Matières