Elation Professional CUEPIX PANEL Manuel D'utilisation page 14

MENU OPTIONS / VALUES
DMX MODE
ADDR:001 - 512
ADDR:xxx CH:xx CH:03, 04, 06, 07, 08, 75, 79, 80
SLAVE
M O D E
AUTO RUN
FQN:01-99
FQN:xx
01.STATIC
-
See INTERNAL MACRO MENU
15.FLOW 10
Standard, Stage, TV, Architectural,
Dim Curve
Theatre
Pixel Flip
STANDARD, Flip 1, Flip 2, Flip 3, Flip 4
NO DMX MODE
Hold, Blackout, Program
Manual RGB
R000-255
Ethernet
Service PINPassword=050
SetFixture ID
Fixture ID
000.000.000.000
Device IP Addr
Fixture ID
000.000.000.000
Ctrl Addr
Fixture ID
000-255
Universe
Ethernet Set
Kling-Net, ArtNet
Protocol Set
Ethernet Set
ON, OFF
Network Switch
ELATION© CUEPIX PANEL™
M E N U S Y S T E M E
Les Specifications Sont Sujerttes a modification sans preavis ecrit.
G000-255 B000-255
w w w . e l a t i o n l i g h t i n g . c o m
DESCRIPTION
DMX Address Setting
Set unit to Slave Mode
Set the number of times each internal macro will
repeat before moving to the next macro.
Select Internal Macro.
Set desired Dimming Curve
Set starting Pixel (COB module).
See Pixel Flip Setting Section.
Define how fixture reacts when NO DMX signal present.
Set RGB Values manually for ALL 25 COB modules.
Enter Service Password to access Ethernet Menus.
Set IP address.
(Need to enter Service PIN to access this menu)
Set Subnet Mask.
(Need to enter Service PIN to access this menu)
Set DMX Universe number.
(Need to enter Service PIN to access this menu)
Set Protocol.
Set Network switch.
14
CUEPIX PANEL™ MANUEL D'UTILISATION