Daga CPR-700 Mode D'emploi page 15

INSTRUCTIONS FOR USE
Prior to turning the device on, select the desired comb guide (F or
G) fitting it by picking it up by the sides and inserting the parts that
stick out into the guide (fig 4) The desired length must be positioned
using the trimming adjustment wheel (H) switching the on switch
upwards (B), in order to ensure that it remains secure, ensuring
that the comb is secure and ready for use. If you want to change the
length, move the switch downwards (B), and reselect the desired
length with the trimming adjustment wheel (H) and when you turn
on the on switch again, the comb is secured.
HOW TO TRIM HAIR
In order to remove the cutting brush, pull
upwards (fig. 5)
This model offers the option of emptying it,
moving to the emptying function side (I) and
the comb is raised, where this function along
with the desired cutting length allows allow
you to shave the scalp without cutting all of
your hair
Select the 0(B) on switch in order to turn off
the product before you disconnect the device
from the mains.
15