Supplied Components; Preparing The Remote Control Unit - Sharp PN-Y555 Manuel D'installation

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp: 2
 Power cord
 R-6 battery ("AA" size): 2
 CD-ROM (Utility Disk for Windows): 1
 Setup Manual (this manual): 1
 Vertical sticker (Logo): 1
 Vertical sticker (Operation panel): 1
 USB flash drive cover: 1
 USB flash drive cover screw: 1
 Model Name / Serial No. label: 1
Indicates the model name and serial number.
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.
 Stand hole protection cover: 2
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit

1. Press the cover gently and slide it in the direction of the arrow.
2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-)
sides oriented correctly.
3. Close the cover.

Supplied Components

5
E