LEXIBOOK AL500DP Mode D'emploi page 7

1. Clock
2. Night light feet (left feet)
3. Battery compartment (at the bottom of the unit)
4. Alarm button
5. Cinderella Button
6. Clock battery compartment
7. Alarm knob
8. Clock knob
9. Night light
10. POWER button
11. SCAN+ button
12. SCAN- button
13. Volume knob
Radio Alarm Clock Night light
The radio and the night light work with 3 x 1.5V
(not included).
When you use the AL500DP for the first time:
1. Using a screwdriver, open the battery compartment
cover located at the bottom of the unit.
2. Install the 3 x AA / LR6 1.5V
included) observing the polarity markings inside
the battery compartment.
3. Close the battery compartment and tighten the screw.
IMPORTANT NOTE: For better performance, it is recommended to use alkaline
batteries with this product.
Clock
The clock works with 1 x 1.5V
1. Using a screwdriver, open the battery compartment
cover located at the back of the clock.
2. Install the AA / LR6 type battery
markings inside the battery compartment.
3. Close the battery compartment and tighten the screw.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are
to be removed from the product before being charged. Rechargeable batteries
are only to be charged under adult supervision. Different types of batteries or
new and used batteries are not to be mixed.
Product description
Battery information
batteries (not
AA / LR6 type battery (not included).
(not included) observing the polarity
7
AA / LR6 type batteries