Télécharger Imprimer la page

BEGA 84 407 Fiche D'utilisation

Luminaire tête de mât

Publicité

Liens rapides

05.20 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Aufsatzleuchte
Pole top luminaire
Luminaire tête de mât
Gebrauchsanweisung
Anwendung
Aufsatzleuchte mit asymmetrischer
Lichtstärkeverteilung für die räumlich tiefe
Ausleuchtung von Flächen und Plätzen.
Der einstellbare Anstellwinkel ermöglicht eine
präzise Ausrichtung der Lichtstärkeverteilung
auf die zu beleuchtende Fläche.
Für Lichtpunkthöhen von 4000 - 6000 mm.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss,
Aluminium und Edelstahl
Beschichtungstechnologie BEGA Unidure
Sicherheitsglas klar
Silikondichtung
Reflektor aus eloxiertem Reinstaluminium
Anstellwinkel einstellbar bis
+ 90° in 10° Stufen
Für Mastzopf ø 76 mm
Einstecktiefe 95 mm
Anschlussleitung X05BQ-F 5 G 1@
Leitungslänge 6 m
BEGA Ultimate Driver
®
LED-Netzteil
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI steuerbar
Zwischen Netz- und Steuerleitungen ist eine
Basisisolierung vorhanden
BEGA Thermal Control
®
Temporäre thermische Regulierung der
Leuchtenleistung zum Schutz temperatur-
empfindlicher Bauteile, ohne die Leuchte
abzuschalten
Schutzklasse I
Schutzart IP 66
Staubdicht und Schutz gegen starkes
Strahlwasser
Schlagfestigkeit IK10
Schutz gegen mechanische
Schläge < 20 Joule
r – Sicherheitszeichen
c  – Konformitätszeichen
Horizontale Windangriffsfläche: 0,06 m²
Gewicht: 6,4 kg
Instructions for use
Application
Pole top luminaire with asymmetrical light
distribution for in-depth illumination of surfaces
and squares.
The adjustable attack angle allows a precise
alignment of the light distribution to the surface
to be illuminated.
For mounting heights 4000 - 6000 mm.
Product description
Luminaire made of aluminium alloy,
aluminium and stainless steel
BEGA Unidure
coating technology
®
®
Clear safety glass
Silicone gasket
Reflector made of pure anodised aluminium
Attack angle adjustable in steps
of 10° up to +90°
For pole top ø 76 mm
Slip fitter insert depth 95 mm
Connecting cable X05BQ-F 5 G 1@
Cable length 6 m
BEGA Ultimate Driver
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI controllable
A basic isolation exists between power cable
and control line
BEGA Thermal Control
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 66
Dust-tight and protection against strong water
jets
Impact strength IK10
Protection against mechanical
impacts < 20 joule
r – Safety mark
c  – Conformity mark
Horizontal wind catching area: 0.06 m²
Weight: 6.4 kg
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
90°
90°
76
76
345
345
545
545
Fiche d'utilisation
Utilisation
Luminaire tête de mât à répartition lumineuse
asymétrique pour un éclairage puissant sur de
larges surfaces ou des places.
L'angle d'inclinaison réglable permet une
orientation de façon précise de la répartition
lumineuse sur la surface à éclairer.
Pour hauteurs de feu 4000 - 6000 mm.
Description du produit
Luminaire fabriqué en fonderie d'aluminium,
aluminium et acier inoxydable
Technologie de revêtement BEGA Unidure
Verre de sécurité clair
Joint silicone
Réflecteur en aluminium pur anodisé
L'angle d'inclinaison est réglable
jusqu'à +90° par paliers de 10°
Pour tête de mât ø 76 mm
Profondeur d'embout 95 mm
Câble de raccordement X05BQ-F 5 G 1@
Longueur de câble 6 m
BEGA Ultimate Driver
®
Bloc d'alimentation LED
220-240 V x 0/50-60 Hz
DC 176-264 V
Pilotage DALI
Une isolation d'origine existe entre le réseau et
les câbles de commande
®
BEGA Thermal Control
Régulation thermique temporaire de la
puissance des luminaires pour protéger les
composants sensibles à la température, sans
pour autant éteindre les luminaires
Classe de protection I
Degré de protection IP 66
Etanche à la poussière et protégé contre les
jets d'eau puissants
Résistance aux chocs mécaniques IK10
Protection contre les chocs
mécaniques < 20 joules
r – Sigle de sécurité
c  – Sigle de conformité
Prise au vent horizontale : 0,06 m²
Poids: 6,4 kg
84 407
r
IP 66
®
®
®
1 / 3

Publicité

loading

Sommaire des Matières pour BEGA 84 407

  • Page 1  – Sigle de conformité Horizontale Windangriffsfläche: 0,06 m² Weight: 6.4 kg Prise au vent horizontale : 0,06 m² Gewicht: 6,4 kg Poids: 6,4 kg BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 3...
  • Page 2 Er dient zur Aufnahme von Restfeuchtigkeit. It is needed to remove residual moisture. Il sert à absorber l’humidité résiduelle. 2 / 3 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 Module LED 4000 K LED-0773/840 Reflektor 76 001 373 Reflector 76 001 373 Réflecteur 76 001 373 Dichtung 83 000 924 Gasket 83 000 924 Joint 83 000 924 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 3...