INFOSEC E6 LCD 10K TM RM Manuel Utilisateur page 71

CVCF mode Description
LCD display
Battery mode Description
LCD display
Bypass mode Description
LCD display
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 04 14 AA 59 203 37
When input frequency is within 46 to 64Hz, the UPS can be set at a constant
output frequency, 50 Hz or 60 Hz. The UPS will still charge battery under this
mode.
When the input voltage is beyond the acceptable range or power failure,
UPS will backup power from battery and alarm will beep every 4 seconds.
When input voltage is within acceptable range and bypass is enabled, turn
off the UPS and it will enter Bypass mode. Alarm beeps every two minutes.
70