Rointe Towel Rails Installation; Mounting; Connecting Instructions - Rointe Tovare AQUA 500 Manuel D'installation Et D'utilisation

2. Rointe towel rails installation

2.1. Mounting instructions
Inside the packaging you will find a fixing kit. Please find the instructions below:
1. Choose the right part of the wall.
2. Place the product to see where the brackets should be located and mark the holes.
3. Make the holes in the wall.
4. Insert the rawl plugs in the holes made.
5. Screw the plastic fastener to the wall with the 5.5 x 50 mm screw.
6. Screw the two brackets for supporting the product and the plastic fastener to the horizontal tube
of the product like in Figure 1 with the 8 x 26 mm screw.
7. Insert what you have assembled in Section 6 into the plastic piece. Fix well with the 5 x 12 mm screw.
8. Place the cover on the piece supporting the product.
NO. ELEMENT
1 10 x 45 mm rawl plug
2 Bracket
3
5.5 x 50 mm screw
4 Plastic bracket with M6 nut
5 Bracket head
6
6 x 35 mm screw
7 Cap
8 8 x 26 mm fixig screw
9 Product

2.2. Connecting instructions

The connection must be carried out in compliance with the current safety regulations. This appliance
is intended to be permanently connected to a fixed water installation.
If possible, the appliance must be installed away from draughts (windows, doors) or anything else that
might interfere with heat dissipation. In this way, it will provide the best thermal comfort. Place any
object that could impede air circulation (furniture, armchairs) 50 cm from the front of the appliance.
The appliance must not be placed in front of or directly below a fixed electric socket. The lower part
must be at least 15 cm above the floor.
4