Greencut CRB500 Manuel D'utilisation page 38

38
ATTENTION: To avoid internal damage to the charger and/or the battery, it is always necessary to
manually disconnect the charger once the ammeter has set a value close to 0.
CHARGING SEVERAL BATTERIES SIMULTANEOUSLY
ATTENTION: Never charge batteries of different capacity, discharge and type. If several batteries need
to be charged simultaneously, you can use either "serial" or "parallel" connections.
SERIES
The "series" connection requires that the batteries have the same capacity (Ah) and that the sum of the nominal
electrical voltages of all the batteries corresponds to the output voltage of the battery charger.
PARALLEL
"Parallel" connection requires that the batteries have the same nominal voltage (Volts) as the one at the battery
charger output and that the sum of the Ah is included in the battery charger's charging range.
END OF CHARGE
• Turn off the power to the battery charger by turning the switch OFF (if present) and/or removing the power cord
from the mains outlet.
• Disconnect the black charging clamp from the car chassis or negative battery terminal (- symbol).
• Disconnect the red charging clamp from the positive battery terminal (+ symbol).
• Put the battery charger back in a dry place.
• Close the battery cells with the relative plugs (if present).
6 6