TCC BASIS MESH Guide D'utilisation page 8

on an infinitely variable scale, pull
adjustment lever on the right side
underneath the seat upwards.
Caution!
The pneumatic springs should
be repaired or replaced by trained
personnel only.
3. Weight adjustment
The weight adjustment regulator is
located at the front beneath the seat.
Turn it to the left to obtain a light setting,
or to the right to tighten the mechanism.
4. Armrest adjustments
Basis 14, 16, 18, 20, 30, 40
A-Armrests fixed, not adjustable
MFA-Armrests, height adjustable
Push the button on the outside of the
armrest underneath the pad to adjust the
height of them.