Maytag Commercial W11033207C Instructions D'installation page 11

CODE
6 07 NORMAL REGULAR CYCLE PRICE
(Factory Default)
NORMAL
6 07 Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the UPPER LEFT key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
6 00 PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide actuation.
g Press the LOWER MIDDLE key pad once to advance
to next code.
6 07 DELICATES REGULAR CYCLE PRICE
(Factory Default)
DELICATES
6 07 Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the UPPER LEFT key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
6 00 PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide actuation.
g Press the LOWER MIDDLE key pad once to advance
to next code.
6 07 POWERWASH REGULAR CYCLE PRICE
(Factory Default)
POWER
WASH
6 07 Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the UPPER LEFT key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
6 00 PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide actuation.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
WASH LENGTH
7 11
7 11 This is the number of minutes for WASH. Washer comes
from the factory preset with 11 minutes. Choose from
9–17 minutes by pressing the LOWER LEFT key pad.
Press the LOWER MIDDLE key pad once to advance
to next code.
g
8 00 ADDITIONAL RINSE OPTION/EXIT SERVICE MODE
NOTE: This only affects NORMAL and DELICATES
cycles. Additional Rinse is always enabled for
POWERWASH.
8 00 Additional Rinse not selected 'OFF'.
Use this field to exit Service Mode when entered
via the key dance.
Press and hold the LOWER LEFT key pad to exit
Service Mode.
8 Ar Additional Rinse selected 'ON'.
Use this field to exit Service Mode when entered
via the key dance.
g Press and hold the LOWER LEFT key pad to exit
Service Mode.
Press the LOWER MIDDLE key pad once to advance
to next code.
CYCLE COUNTER OPTION
9 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the LOWER RIGHT key pad 3 consecutive
times to select 'ON'. Once selected 'ON' it cannot
be deselected.
g Press the LOWER MIDDLE key pad once to advance
to next code.
EXPLANATION
CODE
1. 00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1.
0C Selected 'ON'.
Press the UPPER RIGHT key pad 3 consecutive
times to select 'ON' and 3 consecutive times to
remove (Not Selected 'OFF'.) Counter resets by
going from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
the LOWER RIGHT key pad twice, LOWER LEFT key
pad once, and exit the set-up mode.
g Press the LOWER MIDDLE key pad once to advance
to next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2. 00 Not Selected 'OFF', and next available code will be
A.00.
2. SP Selected 'ON'. Press the UPPER RIGHT key pad
once for this selection.
NOTE: If SPECIAL PRICING OPTION is selected, there is
access to codes '3.XX' through '9.XX'.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
Options to use if SPECIAL PRICING is selected:
3. 07 NORMAL SPECIAL CYCLE PRICE
NORMAL
3. 07 Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
3. 00 PR MODELS ONLY: Factory default of 0 quarters.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
3. 07 DELICATES SPECIAL CYCLE PRICE
DELICATES
3. 07 Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
3. 00 PR MODELS ONLY: Factory default of 0 quarters.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
3. 07 POWERWASH SPECIAL CYCLE PRICE
POWERWASH
3. 07 Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
3. 00 PR MODELS ONLY: Factory default of 0 quarters.
g Press the LOWER MIDDLE key pad once to advance
to next code.
EXPLANATION
11