VESTEL VEB24056 Notice D'utilisation page 39

When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbols "A" and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
warning sound. The symbols will disappear
and the timer will switch back to manual
function.
Semi-automatic time adjustment
(finishing time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press "MODE" until
you see "dur" and
symbol on the display
screen. The symbol
"A" will flash.
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time
will reappear on
the screen, and the
symbols "A", and
will remain illuminated.
will flash.
2. Press "MODE" until
you see "end" and
symbol on the display
screen. "A" and the
current time of day will
flash.
3. Use the "+" and
"-" buttons to set the
desired finishing time.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol "A" and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
sound. The symbol will disappear and the
timer will switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
EN - 16
4. The current time
will reappear on the
screen, the symbols
"A", and will
remain illuminated.
will flash.
2. Press "MODE" until
you see "dur" and
symbol on the screen.
The symbol "A" will
flash.
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time
will reappear on the
screen, the symbols
"A", and will
remain illuminated.
5. Press "MODE" until
you see "end" and
symbol on the screen.
The time and the
symbols "A" and
flash.
will