Safety And Maintenance Instructions - KREAFUNK aCUBE Manuel D'utilisation

SAFETY AND MAINTENANCE INSTRUCTIONS

1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation manual should be
retained for future reference and must be followed at all times.
3. Keep the product away from heat sources such as radiators, heaters or other
appliances that produce heat.
4. Do not expose the product to direct sunlight for longer periods. High
temperatures will shorten the life of the product, destroy the battery and distort
certain plastic parts.
5. Do not expose the product to extreme cold as it may damage the internal circuit
board.
6. Avoid liquids getting into the product.
7. Do not throw with or stamp on the product. This may damage the internal circuit
board.
8. Do not try to disassemble the product. This must only be done by a professional.
9. Do not use concentrated chemical products or detergent to clean the product.
10. Keep the surface away from sharp things, as these may cause damage to the
plastic parts.
11. Use 5V / 1A power supplies only. The connection of power supplies with higher
voltage may lead to severe damage.
12. Do not arbitrarily discard or place the lithium battery near fire or intense heat in
order to avoid a risk of explosion.
If you do experience any problems with your product please contact the retailer
you purchased the product from. The retailer will provide you with guidance and
if that does not solve the problem, the retailer will handle the claim directly with
KREAFUNK.
15