Oceanic OCEACWC8LCD Guide D'utilisation page 14

INSTALLATION INSTRUCTIONS
Before putting your wine cellar into service
 Remove all inner and outer packaging components.
 Check that none of the following parts are missing:
■ 3 removable shelves
■ 1 operating manual
 Before connecting your device to a power supply, allow it to stand
upright for about 2 hours. This reduces the risk of malfunction of the
refrigeration system due to handling during transport.
 Clean the inner surfaces of the unit with a soft cloth and warm water.
 Place your unit on a floor strong enough to support the weight of the
fully filled unit.
 Make sure the unit is level by adjusting the front feet underneath the
unit. Make sure that the cellar rests on its feet in a stable manner.
 Install the appliance away from direct sunlight and heat sources
(radiator, hot plate, etc.). Direct sunlight can damage the unit's coating
and heat can increase its power consumption. If the ambient
temperature is extremely cold or hot, this may prevent the unit from
operating properly.
 The unit is not designed to be installed in a basement or cellar.
 This unit is designed exclusively for indoor use.
Caution: Make sure that the unit is kept away from any substance that
may cause combustion.
 Check that the water tank is in place before connecting the unit.
14