Publicité
Rectangular Laundry Wood Hamper
A.
B.
Bottom
Right and Left
Board x 1
Panel x 2
F
B
STEP 1.
Insert 4 Cam Inserts (F) into the four corners of the Right Side Panel
(B) (the one with a Piano Hinge). Also insert 4 Cam Inserts(F) into the four corners
of the Left Side Panel (B).
B
Tight
D
STEP 3.
Align Right and Left Side Panels (B) to the Back Panel (D) and connect
them together. Use a Slotted screwdriver or Phillips screwdriver to tighten the Cam
Inserts (F). Slide the Bottom Board (A) as shown below.
1.
Two adults are recommended for ease of assembly. Use care when handing.
2.
Assembly recommended on a soft surface, such as carpet, to avoid scratching flooring finish.
3.
Discard the black circular plastic pieces. These are used to separate the shelves for shipping purpose.
Package Contents
C.
D.
Hamper Lid x 1
Back and Front
Panel x 2
B
E
STEP 2.
Insert 4 Threaded Posts(E) into the four corner of the Front Panel (D).
Also insert 4 Threaded Posts(E) into the four corners of the Back Panel (D).
A
STEP 4.
Align Front Panel (D) (Flat Style shown below or Bowed Front Style) to
the Side Panels (B) and connect them together using a Slotted screwdriver or
Phillips screwdriver.
E.
F.
Threaded Post x 8
D
D
Tight
B
RHP0109 Series
G.
Cam Insert x 8
Interior Bag with
2 Metal Rods x 1
G
C
STEP 5.
Align Hamper Lid (C) to the Back Panel(D) using the four Screws for
Hinges(H) provided with a screwdriver to tighten. Connect the Piano Hinge to the
Hamper Lid(C) (see diagram) using the two Screws for Piano Hinge(H) with a
screwdriver. Insert Interior Bag(G) into the hamper (see diagram). Close the lid
and you are done. Congratulations on your new hamper!
CAUTION: Do not allow children to climb or play in or
around the shelves.
H.
I.
L Tool x 1
Screw for Hinges
and Piano Hinge x 6
H
D
Publicité
