Publicité
Assembly Instructions
Williams-Sonoma Inc.
Instructions d'assemblage
Instrucciones de Ensamblaje
Pottery barn kids – PBteen – Pottery Barn – west elm – Williams Sonoma – Williams Sonoma Home – Rejuvenation – Mark and Graham
28-Jan-2021
25/36
Troubleshooting:
WARNING: For your own safety turn off power at fuse box or circuital breaker before trouble shooting your fan.
Problem: Fan fails to operate.
Solutions:
1. Check wall switch to fan.
2. Verify that reverse switch is set completely in either direction.
3. Verify that receiver is wired properly.
4. Check to be sure fan is wired properly.
5. Verify that wall control is wired properly.
6. Check that red light on remote control transmitter turns on when a button is pressed indicating that the battery is good.
7. Learning process between fan and remote control transmitter may not have been successful and code was not activated.
Turn off power, remove battery cover from back of transmitter, and repeat instructions.
Problem: Light kit not lighting.
Solutions:
1. Check wall switch to fan.
2. Check that wires in canopy are wired properly.
3. Learning process between fan and remote control transmitter may not have been successful and code was not activated.
Turn off power, remove battery cover from back of transmitter, and repeat instructions.
Problem: Fan and light fail to operate with remote control.
Solutions:
1. Check battery power to remote control.
2. Learning process between fan and remote control
transmitter may not have been successful and code was not activated. Turn off power, remove battery cover from back of
transmitter, and repeat instructions.
Problem: Fan wobbles.
Solutions:
1. Check to be sure set screw(s) on motor housing yoke is (are) tightened securely.
2. Check to be sure set screw on hanging ball is tightened securely.
US/CA-A
Publicité
