Setting Up/Hanging The Device; Cleaning - ADE WS 1813 Mode D'emploi

Setting up/hanging the device

‚ You can either place the thermometer/
hygrometer on its foot or use the hanging
loop on its back. In the latter case, you
must first remove the foot using a crosstip
screwdriver.
‚ If possible, choose a location where the
device will not be exposed to direct sunlight
and with good air circulation.

Cleaning

‚ Remove dust from the thermometer/
hygrometer with a soft, dry cloth, if necessary.
If necessary, you can also wipe the device
with a slightly damp cloth.
‚ Do not immerse the thermometer/
hygrometer in water or other liquids.
The device is not waterproof.
14
Analogue thermometer/hygrometer WS 1813