Publicité
Les langues disponibles
Les langues disponibles
Operation instruction
Speed control :
Speed is controlled by the piano switch. (-0 -1 -2 -3)
0-off
1-low 2-medium
3-high
Oscillation control :
To make the fan oscillate, push down on the oscillating clutch knob located on the top
of the motor housing. To stop the fan down from oscillating in the position desired,
push on the oscillating clutch knob once more.
Tilting control :
To adjust the air flow upward or downward, push the grilles lightly to the desired
direction.
Height control :
The height of the fan can be adjusted by loosening the height
adjustment ring, carefully raising or lowering the fan and firmly re-tightening the
height adjustment ring.
Maintenance instruction
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified
service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor
free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
VENTILATEUR SUR PIED Ø40CM 40W – Ø16'' 40W STAND FAN
Notice
BRICODEAL SOLUTIONS – 4 rue Yves GLOTIN – CS40005 33083 BORDEAUX CEDEX - FRANCE
Publicité
