LEAD dynamic WCD Manuel D'utilisation page 7

ENGLISH
3
Control
3.1 ON/OFF
Press one of the buttons Z1-Z4 for more than 2 sec-
onds to switch the luminaires you have assigned to
this zone on or off. A blue light signals a switched on
zone and a yellow light signals a switched off zone.
You can assign any number of luminaires to a zone.
2. 1.
3.3 Save scenes
You can assign your zones up to 3 different scenes.
Select a zone Z1-Z4 then the required dimming
level using the dimmer bar and save it as a scene
by holding down a scene button (S1-S3) for at
least 2 seconds. Your luminaire flashes once as
confirmation.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
> 2 sec.
Subject to errors and amendments
3.2 Dimming
Dim your luminaire by first selecting a zone 1-4 and
then using the dimmer bar to adjust your dimming
level.
2. 1.
3.4 Retrieve scenes
To retrieve a saved scene, first select zone (Z1-Z4)
and then the saved scene (S1-S3).
Information / Technical support: www.lead-energy.com