Profim ROCKER Notice D'utilisation page 8

A
Height of the seat
u
Lowering the seat
1. Sit down on the seat.
2. Pull the lever upwards (the seat
will drop slowly).
3. Release the lever at the desired height
and lock the position.
u Raising the seat:
1. Stand up.
2. Pull the lever upwards (the seat
will rise slowly).
3. Release the lever at the desired height
and lock the position.
A
B
8
Operating instruction for the ROCKER Mechanism
B
Angle of the backrest and seat
u Adjustment of the tilt angle of a seat
and a backrest
1. Activate the ROCKER mechanism
by pulling out the lever.
2. Lean against the backrest until it reaches
the defined inclination .
3. Push the lever back in.
NOTE!!!
It is possible to lock the mechanism only
in the initial position, never in the reclining one.