Ingersoll Rand IQV20 Impactool W5111 Manuel D'utilisation page 30

EN
Brush Replacement
(Dwg. 48623813)
Reduced performance, intermittent operation, or no operation are signs of worn brushes.
To check the condition of the brushes remove the battery pack from the tool. Unscrew the brush caps and remove the brushes by lifting on
the metal tab. Note the orientation of the brush when it is removed, if re-installing, it should be inserted in the same orientation. It is normal
for the brushes to wear at different rates. If either brush is below the specified length in the diagram, replace both brushes to maintain peak
performance.
Reinstall brush caps and tighten to proper torque.
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Product Information: Battery
Product Safety Information
Intended Use:
These batteries are used as the power source for Ingersoll Rand Cordless Products.
• Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
• Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper disposal may endanger the environment or
cause personal injury.
For additional information, refer to Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Models Chemistry
BL2005 Lithium Ion
BL2012 Lithium Ion
BL2010 Lithium Ion
BL2022 Lithium Ion
Operating Temperatures
Rechargeable batteries give their best performance when they are operated at a normal room temperature of 59°F to 77°F (15°C to 25°C). An
excessively hot or cold battery may prevent or interrupt the battery from being charged or discharged.
Parts and Maintenance
Labels are the only User Replaceable Parts.
Models Warning Labels
BL2005 BL20-99
BL2012 BL20-99-3
BL2010 BL20-99-2
BL2022 BL20-99-4
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
EN-2
< 0.354in [9mm]
WARNING
Voltage (V) Capacity (Ah)
20 1.5
20 2.5
20 3.0
20 5.0
Replace
0.7 - 0.9 nm
OFF
6 - 8 in-lbs
Weight (lbs (kg))
0.908 (0.412)
0.935 (0.424)
1.555 (0.704)
1.595 (0.724)
47497352001_ed6