Eltax Voyager BT10 Mode D'emploi page 3

CONTROL PANEL
(1)
MODE : Select and switch between Bluetooth, AUX, USB, TF (microSD) and FM inputs.
/
RECORD : Short-press to start playback recording / Long-press to start recording
REPEAT / MIC. PR : Short-press to repeeat mode / Long-press to microphone priority
PREVIOUS SONG / PREVIOUS RADIO STATION
PLAY/PAUSE : Short-press to Play/Stop/ FM Auto scan / Long-press to delete record files (effective when playing record
files)
NEXT SONG / NEXT RADIO STATION
BATTERY CHARGE INDICATOR :
(2)
Charge : red light / Full : green light
BATTERY
• Please charge the battery before using the Voyager BT outdoor (charging time : 8-10 hours). More charging time can damage
the battery and significantly reduce its lifetime.
• When the battery is out of charge after being used for a short time, please charge the built-in battery.
• If you don't use the Voyager BT for a long time, please charge the battery every six months, to avoid the invalidity of the
battery.
MP3
• If you want to use the MP3 function, please format your USB disk as FAT-32 format on your computer first.
• Please note that the Voyager BT will play the files according to the sequence on the USB disk. If you want to play a specific
sequence, you need to arrange the sequence as you want on the USB disk first.
Remote control
To change to previous radio station
or
(2)
To scan the local radio station and
save it automatically (first saved
radio will be on memory 1, etc)
Use the numbers to choose
saved radio station number or
track selection (USB/TF)
Mute
CH-
Repeat
Scan
U/SD
Select USB or TF (microSD) mode
CH+
To change to next radio station
EQ
Equalizer : to change DSP
sound effect
Mode
Change BT/FM/AUX input
UK