Installation And Use; Safety Instructions; Use - Casselin CVR58L Mode D'emploi

Masquer les pouces Voir aussi pour CVR58L:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

5. INSTALLATION AND USE

5.1 Safety instructions

ELECTRICAL HAZARD
Danger from electric current!
• No contact with heat sources should take place with the power cord.
• Cord should not hang over edge of table or counter.
• Do not pour water into an appliance that is in operation or that is still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.

5.2 Use

WARNING
The set-up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
- The device must be completely removed from its packaging. All protections must be completely removed.
- Place the appliance upright on a solid, flat surface. Never place the refrigerated display case on a
flammable surface. Position this machine in such a way as to ensure optimal air circulation. We advise you
to keep a minimum distance of 10 cm from the wall and other objects.
- Do not install this device near open fires or other heating devices.
- Do not install the device in a wet or humid place.
- The appliance must be connected directly to a wall outlet protected by a 16A circuit breaker or fuse. The
use of a multiple socket is prohibited.
- To avoid damaging the compressor, do not tilt the device more than 45 ° when transporting or installing it.
- Let the device stand for at least 2 hours before its first use.
- Before use, the device must be cleaned.
- Connect the appliance and check the thermostat setting. Do not put food or drinks until the display case is
at the desired temperature.
- Any hot food must be cooled before insertion into the appliance.
- The height of the shelves must be adapted to the height of the dishes or drinks. Dishes should be properly
spaced to maximize the effect of refrigeration.
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cvr78lCvr98l

Table des Matières