König Electronic AVSWITCH-85 Mode D'emploi page 3

Connections:
Front View
Rear View
Connecting
Step 1:
Connect the HDMI cables from the HD sources (PS3, DVD player etc.) to the input ports
of the HDMI Switch.
Step 2:
Connect the HDMI cable from your HD display (HDTV, monitor, projector etc.) to the
output port of the HDMI Switch.
Step 3:
Plug the 5 V DC power supply in to the HDMI Switcher.
Step 4:
After you've connected the adapter to a wall socket, the power indication LED will light
up. After you've chosen a source, the source indication LED will light up to indicate the
chosen source.
Note:
1. After you plug in the DC 5V power adapter, the power will be turned on.
2. The "SELECT/AUTO" button can also be used as an auto mode control button. Press
the button for 3 seconds to turn on or off the auto switching function.
3. When the "AUTO" LED light is ON, the HDMI switch can be operated with the remote
control, the buttons of the front panel or with the auto mode.
4. When the "AUTO" LED light is OFF, the auto switching function will be disabled. The
HDMI switch can be operated with the remote control or the buttons on the front of the
panel.
3