How To Charge; How To Operate - DISCOVER P11 Mode D'emploi

4. Button Volume + : Increase volume
5. Battery indicator
6. Button Volume - : Decrease volume
7. Button Mode (Bluetooth, USB key, FM Radio, AUX)
8. Button voice assistance
9. USB-C input for charging
10. USB input for music (USB key)
11. AUX input
12. Reset
PACKAGE CONTENTS :
- Portable speaker
- USB cable (for charging)
- AUX cable
- Manual
1 2 3 4 5 6 7 8

5. HOW TO CHARGE

WARNING : Before charging or recharging your appliance, carefully read the section warning for the
rechargeable battery in this manual.
Connect the included USB cable (USB-C) to the input provided on the speaker (open the cap first) and plug
the other end of the cable into a compatible power source (5V 2A).
The 4 battery indicators will stay on without blinking once the battery is fully charged.
Charging time : 4-6h.
When the battery is almost empty, the speaker will prompt for recharging.
It is recommended to not use the speaker while charging, or to do so only at 50% volume.

6. HOW TO OPERATE

WARNING : Before using your appliance, carefully read the safety instructions in this manual.
This speaker cannot act as a « Power Bank », under any circumstances a device (phone, tablet, etc.)
cannot be recharged using the speaker. USB on the speaker is an input (for playing music from a USB
key) and not an output.
It is recommended, in order to preserve your health (ears, etc.) and the life of the speaker, to avoid
listening music at the maximum volume.
POWER ON/OFF
Press (long press, about 3 seconds) the Power On / Off button to turn on the speaker. Press (single press)
the On / Off button to turn off the speaker.
BLUETOOTH
1. Turn on the speaker, it switches to Bluetooth mode automatically.
2. Activate Bluetooth in your phone settings and select the device named « DISCOV 3 » from the list of Blue-
tooth devices.
3. When connected, the speaker will emit a sound.
14
9
10 11 12