Télécharger Imprimer la page

Beka LED Ekspoled 200 WW Manuel D'utilisation page 8

Publicité

Les langues disponibles

Les langues disponibles

User manual
ENGLISH
1.Before you begin
1.1 What are included
1) 1 x ekspoled 200RGB ot ekspoled200RGBDMX
2) Manual
There is no power cable in the box, this is optional, and will be a cable with powercon true.
1.2 Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the
contents to ensure that all parts are present, and have been received in good
condition. Notify the shipper immediately and retain packing material for inspection if any parts
appear damaged from shipping or the carton itself shows signs
of mishandling. Save the carton and all packing materials. In the event that a
fixture must be returned to the factory, it is important that the fixture be returned
in the original factory box and packing.
1.3 Safety Instructions
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance .
* Please keep this User Guide for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
*Always make sure that you are connecting to the proper voltage and that the line
voltage you are connecting to is not higher than that stated on decal or rear panel of
the fixture.
* This product is intended for indoor and outdoor and has a IP65 rating.
* To prevent risk of fire or shock, do not submerge and follow the rules of the ip65 rating. Make
sure there are no flammable materials close to the unit while operating.
* DO NOT look directly at the light while the fixture is on
* The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces. Do not cover the back radiator of this unit.
*Always disconnect from power source before servicing or replacing lamp or fuse
and be sure to replace with same lamp source.
* In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts. dimmer pack.
* Make sure power cord is never crimped or damaged.
* Never disconnect power cord by pulling or tugging on the cord.
* Don't operate this device under 113° F ambient temperature conditions.
Ekspoled 200
8

Publicité

loading

Produits Connexes pour Beka LED Ekspoled 200 WW