Control Panel Notifications - Olimpia splendid UNICO TOWER Instructions Pour L'installation

Keys
Before performing the following operations, press one of the
keys to enable the console.
+
increase in the desired temperature (maximum value
settable is 30°C/86°f).
-
Decrease in the desired temperature.
(minimum value settable in heating mode is 16°C/61°f,
in cooling mode is 18°C/64°f).
activation/deactivation (Stand-by) of the air conditioner
and ventilation speed selection.
- Brief tap to select minimum, medium, maximum or automatic speed.
- Prolonged press for activation/deactivation (Stand-by).
MODE operation mode selection and parameters setting
- Brief tap (for more than 2 seconds) to select ventilation, cooling or heating operation modes
- Prolonged press to enable parameters setting if in Stand-by mode
+ -
and to be pressed simultaneously for at least 5 seconds to enable/disable the keypad lock function
and MODE to be pressed simultaneously and for an extended period of time (at least 5 seconds) to
set to zero the filter dirty report
Others
IR
infrared receiver
B Buzzer

3.3 - CONTROL PANEL NOTIFICATIONS

The console includes the notifications listed below.
OPERATING CONDITIONS
Stand-by
Cooling mode
Heating mode
Dehumidification mode
Ventilation mode
automatic mode
maximum ventilation speed
medium ventilation speed
EN - 18
LED1
DISPLAY
off
18÷30°C/64÷86°f
16÷30°C/61÷86°f
LED5
MODE
Display
LED5 LED1
off off
on
X
BlUe
on
X
reD
on
X
BlUe
off X
X X
X X
X X
>>>
B