Schneider Airsystems KLG 80/16 Notice D'utilisation D'origine page 5

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Compatible staplers (length)
Staple type
Staple back width, type 80
Wire thickness
Magazine capacity
Pulse sound pressure level L
as per DIN 45 635, part 66
Pulse sound power level L
as per DIN 45 635, part 66
Vibration (under load) as per DIN EN 28 662, Part1
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Catch lever
04 Magazine
05 Magazine slide
07 Guide plate
3
3
3
3
3
3
5
(at distance of 1 m)
pa 1m
wa
1.2 Scope of delivery
– Stapler
– Allen wrench 3 mm
– Allen wrench 4 mm
– Oil bottle
– Instruction manual
1.3 Conventional use
The compressed air stapler
is an industrial tool designed for:
Fastening fabrics, films, insulation and other
soft materials.
Any other type of use is considered contrary
to the intended use.
255 x 45 x 146 mm
10 Interlock
11 Exhaust air guide
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
GB
KLG 80 / 16
0,5 l/impact
7 bar
5 - 7 bar
6 - 16 mm
80
12,8 mm
0,9 x 0,66 mm
155 Piece
97,8 dB(A)
107,44 dB(A)
2
1,0 m/s
6 mm
0,9 kg
I/ 3