Miele APCL 15 Notice De Montage page 15

M.-Nr. 11313350
Parts included
Quantity Mat. no. Designation
1 Stand
2 Clamp
4 B6.4 washer
2 M6x30 bolt
4 M6 nut
4 S12 plug
4 8.4 washer
4 8x65 wood screw
8 38x4 washer
20 Spacer
2 Clamping plate
4 CEM 6 x 12 raised-head screw
2 M6x20 bolt
1 Front panel (closed stand only)
2 Side panel (closed stand only)
12 M4x25 raised-head screw (closed stand only)
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety regulations must be taken into account.
A
Read the technical service documentation (TSD) before starting service work.
Before service work
– Carry out appropriate safety tests.
– Disconnect all machine utility connections in accordance with the operating instructions.
After service work
– Carry out appropriate safety tests.
– Check the machine for correct operation.
Risk of cuts
WARNING
Components are sharp.
Risk of cuts during service work.
A
Wear protective gloves.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
15 von 45
04.09.2019