Product Description; Designated Use; Technical Data; Noise Emission Values - erba 18070 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 - Tool connector
2 - Power regulator
3 - Air coupling
4 - Tool set
5 - Exhaust hose
6 - Maintainance kit

3. DESIGNATED USE

The die grinder set is suitable for grinding, cuttting, removing rust, shaping, etc. A suitable air compres-
sor must be used. Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for
any damage or injury resulting from improper use of the product (i.e. any other use than the above
stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

4-6,3 bar
Working pressure:
60 L/Min.
Air consumption:
Collet: 3mm
54.000 U/min
Rotation speed:

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.
Page 10
Instruction manual
ERBA GmbH
18070
A-1230 Wien
Issue: 06/2017
Talpagasse 6
Changes, print, punctuation and other errors reserved!
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at