ION OCTAVE LP Guide D'utilisation page 4

Features
Front Panel
17
15
1. Power: Press this button to turn the unit on or put it into standby mode. Do not turn the
unit off during media playback—doing so could damage your media.
2. Source: Press this button to select the playback source: CD, USB, Phono, Tape, DAB,
FM, or Bluetooth.
3. Menu: In FM and DAB Modes, press this button to view a Menu with additional settings.
4. Scan: In FM Mode, press this button to scan for the next station.
5. Info: In FM and DAB modes, press this button to view information about the current
station.
6. Preset: In FM and DAB modes, press this button to view saved stations. Press and hold
this button to save the current station as a preset. There are 10 preset slots for each
mode.
7. EQ: Press this button to select an EQ setting: Flat, Pop, Classic, Rock, or Jazz.
8. Eject: Press this button to eject the CD in the CD Tray.
9. Play/Pause: Press this button to start, resume, or pause playback.
10. Stop: Press this button to stop playback.
11. Previous / Down: Press this button to skip to the previous CD, USB, or Bluetooth track.
Press and hold this button to search backward in the track. Release it to resume
playback.
12. Next / Up: Press this button to skip to the next CD, USB, or Bluetooth track. Press and
hold this button to search forward in the track. Release it to resume playback.
13. Play Mode: Press this button to cycle through the repeat and random playback modes.
In CD and USB Modes, press this button while playback is stopped to enter
programming mode.
14. Record: Press this button to enter USB recording mode if a USB flash drive is connected
to the USB Port.
15. Volume: Turn this knob to adjust the sound level for the internal speakers.
16. Tuning / Enter: Turn this knob to select the FM or DAB radio station frequency. When
navigating menus, use this knob to browse options, and press it to confirm a selection.
17. USB Port: Connect your USB flash drive here to play tracks or record files.
18. CD Tray: Insert a CD into this tray. This unit is designed to play commercially available
CDs, properly burned and finalized CD-Rs and CD-RWs, and MP3 CDs.
19. Aux In (1/8" / 3.5 mm): Use a standard stereo 1/8" (3.5 mm) cable to connect an optional
line-level audio source to this stereo auxiliary input.
20. Display: This screen indicates the unit's current operation.
21. Remote Sensor: Point the remote control at this sensor when operating it.
4
1
2
3
4 5
6
7
18
8
20
9
11
13
21
19
10
16
12
14